Chưa có sản phẩm trong giỏ hàng.
Loa Array LMS-62P KOREA
Mô tả sản phẩm
Loa Array LMS-62P KOREA
✓
Mua ngay
Gọi điện xác nhận và giao hàng tận nơi
Mô tả
Thông số kỹ thuật
| Model | LMS-62P |
| Configuration | 2-way Full-Range, Bi-amp |
| High-frequency Transducer | SK-70D HF Driver on SFG 10(Converging Lens) |
| Low-frequency Transducer | SK65200FP, 6.5″(162mm) woofer x 4. |
| Frequency Response (± 3dB)¹ | 80 Hz – 20kHz |
| Frequency Range (-10dB)¹ | 65Hz – 23kHz |
| Nominal Impedance | LF : 16Ω/4Ω Selectable / HF : 16Ω Fixed |
| Continuous Power Capacity | HF : 70W/280W PEAK |
| LF : 360W/1440WPEAK | |
| Sensitivity (㏈ SPL, 1 W at 1 m) | HF : 105dB |
| LF : 100dB | |
| Recommended Power | HF : 140W |
| LF : 720W | |
| Maximum Output,Continuous/Peak (dB SPL at 1 m) | HF: 123.47dB /129.47dB |
| LF: 125.58dB /131.58dB | |
| Nominal Coverage | H : 110º |
| V: Dependent on number of elements used | |
| Enclosure Type | Ported, trapezoidal |
| Enclosure Material | 2 x 12 mm birch plywood |
| Finish | Available in black or White(Option), paintable |
| Grille | Perforated, powder coated 16AWG steel, |
| Connectors For Amplifiers | 2× Neutrik Speakon in parallel |
| Pins : 1+/1- LF | |
| Pins : 2+/2- HF | |
| Controls for Select LF Impedance | 4 ohm/off/16 ohm by up down switch |
| Controls for Select HF Sound Level | Normal/off/-3dB by up down switch |
| Attachment Points | Integral, “I” plate adjustable rigging system, vertical |
| splay adjustable in 1º incremments from 0º – 10º | |
| Dimensions | |
| Weight (Net/Shipping) & Volume | |
| Available Accessories | B6015LMH: Array Frame/P62SB : Safety bar(full-back bar)/ |
| P62LMIFF, P62LMIRR : Fly Grid plate/L09LM: Locking Pin | |
| B62LMU: ground-stacked “U” frame/ | |
| SPM-35130 speaker pole |
Loa Array LMS-62P KOREA
Open this in UX Builder to add and edit content
Đánh giá (0)
Chưa có bình luận nào
Sản phẩm tương tự
Đặt mua Loa Array LMS-62P KOREA
Loa Array LMS-62P KOREA
Liên hệ
Thông số kỹ thuật
| Model | LMS-62P |
| Configuration | 2-way Full-Range, Bi-amp |
| High-frequency Transducer | SK-70D HF Driver on SFG 10(Converging Lens) |
| Low-frequency Transducer | SK65200FP, 6.5″(162mm) woofer x 4. |
| Frequency Response (± 3dB)¹ | 80 Hz – 20kHz |
| Frequency Range (-10dB)¹ | 65Hz – 23kHz |
| Nominal Impedance | LF : 16Ω/4Ω Selectable / HF : 16Ω Fixed |
| Continuous Power Capacity | HF : 70W/280W PEAK |
| LF : 360W/1440WPEAK | |
| Sensitivity (㏈ SPL, 1 W at 1 m) | HF : 105dB |
| LF : 100dB | |
| Recommended Power | HF : 140W |
| LF : 720W | |
| Maximum Output,Continuous/Peak (dB SPL at 1 m) | HF: 123.47dB /129.47dB |
| LF: 125.58dB /131.58dB | |
| Nominal Coverage | H : 110º |
| V: Dependent on number of elements used | |
| Enclosure Type | Ported, trapezoidal |
| Enclosure Material | 2 x 12 mm birch plywood |
| Finish | Available in black or White(Option), paintable |
| Grille | Perforated, powder coated 16AWG steel, |
| Connectors For Amplifiers | 2× Neutrik Speakon in parallel |
| Pins : 1+/1- LF | |
| Pins : 2+/2- HF | |
| Controls for Select LF Impedance | 4 ohm/off/16 ohm by up down switch |
| Controls for Select HF Sound Level | Normal/off/-3dB by up down switch |
| Attachment Points | Integral, “I” plate adjustable rigging system, vertical |
| splay adjustable in 1º incremments from 0º – 10º | |
| Dimensions | |
| Weight (Net/Shipping) & Volume | |
| Available Accessories | B6015LMH: Array Frame/P62SB : Safety bar(full-back bar)/ |
| P62LMIFF, P62LMIRR : Fly Grid plate/L09LM: Locking Pin | |
| B62LMU: ground-stacked “U” frame/ | |
| SPM-35130 speaker pole |
Bạn vui lòng nhập đúng số điện thoại để chúng tôi sẽ gọi xác nhận đơn hàng trước khi giao hàng. Xin cảm ơn!
Open this in UX Builder to add and edit content
Review Loa Array LMS-62P KOREA
Chưa có đánh giá nào.